Mazzei Injector Corp. Logo

Pure Oxygen Injection - Activated Sludge WWTPs

Wastewater AirJection® Overview
Retrofit Advantages
Mazzei® Injectors
MTM™ Nozzles
Alpha Testing (High-Contaminant)
Alpha Testing (High-Solids)
SOTR Testing
SAE Data
Publications and Case Studies
_______________
Activated Sludge Aeration
Odor Control
Ozone for Disinfection
Post-Treatment Aeration
Sewer Main Aeration
Sludge Digestion

Mazzei AirJection System

Advantages:

  • Subsurface injection of oxygen to the bottom of the tank where the head pressure of the water column facilitates higher oxygen solubility.
  • Very high oxygen utilization rates.
  • The ability to feed oxygen selectively into the various stages to optimize the treatment process.
  • Very fine regulation of dissolved oxygen levels in the wastewater to prevent the growth of Nocardia microorganisms, which cause severe foaming problems in conventional pure oxygen plant configurations.

How it Works:

The use of pure oxygen, as opposed to air for the oxygen source, has been successfully employed in high-rate activated sludge wastewater treatment plants for many years. The primary advantage is the ability to sustain much higher oxygen uptake rates (OUR) than is possible using air due to the higher dissolved oxygen (DO) levels that can be maintained utilizing oxygen. The higher DO promotes much faster oxygen utilization by the activated sludge biomass as it consumes and stabilizes the BOD and nutrients in the influent. The result is effective treatment of wastewater in tanks/facilities that are typically much smaller in volume and footprint than an equivalent air-fed activated sludge plant.

Conventional pure oxygen WWTP’s are typically closed-top multi-stage (usually four-stage) tanks. Each stage incorporates a shaft driven low speed surface aerator and often a hydrofoil impeller to mix the bottom of the stage. Pure oxygen is fed into the headspace of the first stage where the low speed surface aerator contacts it with the wastewater. The headspace gas flows through the headspaces of the subsequent stages where it is further depleted of oxygen until the last stage where it is only about 40% oxygen, which is wasted to the atmosphere.

Click Here to See a Case Study Using Pure Oxygen Injection.

_______________________________________

Click below to see more information about each application:

1 Sewer Main Aeration 3 Activated Sludge Aeration 5 Post Aeration
2 Odor Control 4 Pure Oxygen Injection 6 Sludge Digestion
7 Ozone Disinfection

1-Sewer Main Aeration 2-Odor Control 3-Aeration 4-Pure Oxygen 5-Post Aeration 6-Sludge Digestion 7-Ozone for Disinfection

 


Look for The Mazzei® Design . . . Because It's What's Inside That Matters!

Click to Find Out More About Mazzei Injectors Technical Support Staff                           Same-Day Shipping                           High Quality Materials - PVDF, ECTFE, 316L Stainless Steel                           Continued Customer Support                           Experienced Engineers                           Patented Technology                           Quality Products                           Over 27 Years in Business
 

 

The Mazzei Look is a three-dimensional registered trademark.